Echo SRM - 2110 Instrukcja Użytkownika Pobierz pdf (Strona 31)

RASS

RIMMER

RUSH

UTTER

PERATOR

ANUAL

LUBRICATION

Level 1.

Tools required: 8 mm Open End Wrench, Cross Head Screwdriver,

Clean rag

Parts Required: Lithium Base Grease.

Gear Housing

1. Clean all loose debris from gear box.

2. Remove plug (A) and check level of grease.

3. Add grease if necessary, DO NOT over fill.

Drive Shaft

1. Loosen two (2) screws (B) and remove center locating screw (C).

Pull gear box and shield from drive shaft housing.

2. Pull flexible cable from the drive shaft housing, wipe clean and

recoat with a thin coating of [15 ml (1/2 oz.)] of high temperature

automotive grease.

3. Slide the flexible cable back in the drive housing. DO NOT get

dirt on the flex cable.

4. Install the gear housing and shield assembly.

NYLON LINE REPLACEMENT

Level 1.

Tools required: Head locking tool (if head is to be removed)

Parts Required: ECHO 0.095" Nylon Trimmer Line 12m (40 ft.)

long.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Brak uwag

Echo SRM - 2110 Instrukcja Użytkownika Strona 31